XESUN does not serve residents of the United States, Canada, Israel, Iran, Cuba, North Korea, Syria, Russia, Belarus, Myanmar or Venezuela, or other jurisdictions subject to applicable international sanctions or restrictions. Eligibility is decided by XESUN and applicable law. Adults 18+ only.
XXESUNPARTNERS GLOBAL
Open an account
Choose language
English简体中文繁體中文Españolالعربيةहिन्दीPortuguêsFrançaisDeutsch日本語한국어РусскийBahasa IndonesiaTiếng ViệtBahasa Melayuไทย
XESUN knowledge series · 07

Spreads, commission and swap

Last updated:

Understand spread, commission and swap in MT5, compare a hypothetical cost budget and avoid counting spread twice. Verify current XESUN terms.

XESUN Global AcademySynthetic voice may be used
1 / 9

Spreads, commission and swap

Understand spread, commission and swap in MT5, compare a hypothetical cost budget and avoid counting spread twice. Verify current XESUN terms.

Lesson transcript
  1. Spreads, commission and swap — Understand spread, commission and swap in MT5, compare a hypothetical cost budget and avoid counting spread twice. Verify current XESUN terms.
  2. Lesson 1 — Why can a trade start in the red? Look at both prices, even if the chart barely moves. Suppose EUR/USD shows Bid 1.10000 and Ask 1.10012. If a buy fills at the Ask and you close it at the same Bid, the exit price is 1.2 pips below your entry before any separate fees. That difference is the spread. These are made-up quotes, and the prices you actually get can change as orders are filled. A broker’s advertised minimum is not the spread you will necessarily see.
  3. Lesson 2 — Commission: check the charging unit. Check whether the charge is per lot, per deal or based on value, and whether it applies on entry, exit or both. Minimum charges and tiers can change comparisons. An account with no separate commission can still carry spread and other costs; compare the total for the same instrument and volume.
  4. Lesson 3 — Swap: holding a position across rollover. A position held through the broker’s rollover may receive a financing credit or incur a debit. Long and short rates, calculation units and daily multipliers can differ. Verify the current symbol schedule and account terms. Do not assume every Wednesday is a triple-charge day or that a swap-free label removes all fees. The XESUN Client Agreement (§10.7) says a separate holding fee may apply to some instruments left open for at least one day. Confirm whether this applies to your account and exact symbol, when the fee starts, and how much it is.
  5. Lesson 4 — Hypothetical cost budget, not an XESUN quote. Assume EUR/USD, a USD account, one lot of 100,000 EUR and one pip of 0.0001. The assumed pip value is 10.00 USD. A 1.2-pip spread costs 12.00 USD; commission of 3.50 USD per side totals 7.00 USD, plus a 2.00 USD swap debit. Estimated friction: 12.00 + 7.00 + 2.00 = 21.00 USD. These are invented assumptions, not current XESUN specifications. Price movement, slippage, conversion and other charges are excluded. Continue the same hypothetical example. Suppose the buy fills at 1.10015 instead of the quoted Ask of 1.10012, and the exit still fills at Bid 1.10000. The worse entry adds 0.3 pip, or 3.00 USD. With commission and the swap debit unchanged, total friction is 24.00 USD instead of 21.00 USD. When you start from profit or loss calculated from those actual fills, the price difference already includes both the spread and this slippage. Do not deduct either again.
  6. Lesson 5 — Reconcile costs without double counting. In MT5, inspect the symbol specification from Market Watch and compare it with official account terms. Check contract size, tick value, currency, commission and rollover rules; menus can differ by device. Then review account history. Profit calculated from actual Bid/Ask fills already reflects the spread: do not subtract that spread again when reconciling the result.
  7. Lesson 6 — Practise the comparison before considering live trading. Use a demo journal to record quotes, volume, holding time and cost assumptions. Margin is collateral, not the same thing as a fee or a limit on loss. A cheaper account does not make leveraged trading safe or profitable; adverse prices and gaps can cause substantial losses. Eligibility and actual terms must be checked with XESUN.
  8. Risk warning — Forex, CFDs and other leveraged products involve a high level of risk and may not be suitable for every investor. You may lose all or more than your initial deposit. Consider your financial position and experience, and seek independent advice if necessary. XESUN does not serve residents of the United States, Canada, Israel, Iran, Cuba, North Korea, Syria, Russia, Belarus, Myanmar or Venezuela, or other jurisdictions subject to applicable international sanctions or restrictions. Eligibility is decided by XESUN and applicable law. Adults 18+ only.
  9. Partner disclosure — We may receive a commission when an eligible client registers through our referral link and trades. This website is an independent marketing and education resource, not the broker.

Why can a trade start in the red?

Look at both prices, even if the chart barely moves. Suppose EUR/USD shows Bid 1.10000 and Ask 1.10012. If a buy fills at the Ask and you close it at the same Bid, the exit price is 1.2 pips below your entry before any separate fees. That difference is the spread. These are made-up quotes, and the prices you actually get can change as orders are filled. A broker’s advertised minimum is not the spread you will necessarily see.

Commission: check the charging unit

Check whether the charge is per lot, per deal or based on value, and whether it applies on entry, exit or both. Minimum charges and tiers can change comparisons. An account with no separate commission can still carry spread and other costs; compare the total for the same instrument and volume.

Swap: holding a position across rollover

A position held through the broker’s rollover may receive a financing credit or incur a debit. Long and short rates, calculation units and daily multipliers can differ. Verify the current symbol schedule and account terms. Do not assume every Wednesday is a triple-charge day or that a swap-free label removes all fees. The XESUN Client Agreement (§10.7) says a separate holding fee may apply to some instruments left open for at least one day. Confirm whether this applies to your account and exact symbol, when the fee starts, and how much it is.

Hypothetical cost budget, not an XESUN quote

Assume EUR/USD, a USD account, one lot of 100,000 EUR and one pip of 0.0001. The assumed pip value is 10.00 USD. A 1.2-pip spread costs 12.00 USD; commission of 3.50 USD per side totals 7.00 USD, plus a 2.00 USD swap debit. Estimated friction: 12.00 + 7.00 + 2.00 = 21.00 USD. These are invented assumptions, not current XESUN specifications. Price movement, slippage, conversion and other charges are excluded.

Continue the same hypothetical example. Suppose the buy fills at 1.10015 instead of the quoted Ask of 1.10012, and the exit still fills at Bid 1.10000. The worse entry adds 0.3 pip, or 3.00 USD. With commission and the swap debit unchanged, total friction is 24.00 USD instead of 21.00 USD. When you start from profit or loss calculated from those actual fills, the price difference already includes both the spread and this slippage. Do not deduct either again.

Reconcile costs without double counting

In MT5, inspect the symbol specification from Market Watch and compare it with official account terms. Check contract size, tick value, currency, commission and rollover rules; menus can differ by device. Then review account history. Profit calculated from actual Bid/Ask fills already reflects the spread: do not subtract that spread again when reconciling the result.

Practise the comparison before considering live trading

Use a demo journal to record quotes, volume, holding time and cost assumptions. Margin is collateral, not the same thing as a fee or a limit on loss. A cheaper account does not make leveraged trading safe or profitable; adverse prices and gaps can cause substantial losses. Eligibility and actual terms must be checked with XESUN.

About this content

Published by XESUN Partners Global, an independent marketing partner. Educational text and translations are prepared with AI assistance. Official links let you verify broker terms; they are not an endorsement of this website. This content is not personal investment advice.

Forex, CFDs and other leveraged products involve a high level of risk and may not be suitable for every investor. You may lose all or more than your initial deposit. Consider your financial position and experience, and seek independent advice if necessary.

Partner disclosure

We may receive a commission when an eligible client registers through our referral link and trades. This website is an independent marketing and education resource, not the broker.

Official sources

Check the current product terms and eligibility directly with XESUN because conditions can change.

Sources checked:

Frequently asked questions

Does a zero-spread quote mean free trading?

No. It may describe a minimum or a temporary quote. Commission, financing, conversion and other applicable costs can remain.

Is triple swap always charged on Wednesday?

No universal day applies. Check the symbol’s rollover schedule, multipliers and holiday arrangements with the broker.

Does a blank Commission field mean the trade had no commission?

Not necessarily. Depending on the broker’s terms, MT5 may record commission against each fill or collect it later in a separate balance entry. In account history, check both the deals and the balance entries for the same period. Count each charge once; if the total you are reading is already net of that charge, leave it as shown.

Ready to continue?

Review the official account terms, eligibility, regional restrictions and risk disclosures before applying.

Open an account